Exigences techniques pour les routeurs
- Fiber7-X2: 25G SFP28 BIDI LR, TX1270/RX1330 nm
- Fiber7-X: 10G SFP+ BIDI LR, TX1270/RX1330 nm
- Fiber7 : Gigabit WAN, DHCP, 1310-1550nm
- Crossover7 : Gigabit WAN, DHCP, 1310-1550nm
- Hybrid7 : Gigabit WAN, VLAN Tagging, PPPoE, 1310-1490nm
- Hybrid7 P2MP : actuellement uniquement compatible avec le routeur Zyxel AX7501-B0 ou la bridge XGS-PON Nokia XS-010X-Q
- Copper7 : (VDSL): VDSL2 (17a), analog (Annex A), PPPoE
- Copper7 : (FTTS): G.Fast, PPPoE
Manuels d'installation pour les routeurs
- FRITZ!Box 5530 avec Fiber7 et Crossover7
- FRITZ!Box 5530 avec Hybrid7
- FRITZ!Box 5490 avec Fiber7 et Crossover7
- FRITZ!Box 5490 avec Hybrid7
- FRITZ!Box 5490 et 5530 amélioration du WLAN
- FRITZ!Box 5490 et 5530 configuration du sous-réseau public IPv4 dans la FRITZ!Box
- Nokia XS-010X-Q convertisseur pour Hybrid7 P2MP
- Zyxel AX7501-B0 Fiber7-X et Fiber7
- Zyxel AX7501-B0 Hybrid7 (P2MP)
- Zyxel XMG3927 Copper7
- Zyxel XMG3927 Copper7 (Preorder)
- MikroTik CCR2004-1G-12S+2XS Fiber7-X2 et Fiber7-X
Configuration du routeur TV7
- Fritzbox 5490, 7490, 7582, 7390: The IGMP proxy will be set up by the default configuration
- ASUS RT-AC87U IGMP Proxy
- ASUS RT-AC68U IGMP Proxy
- Edge IGMP Proxy
- Netgear Nighthawk R8000 IGMP Proxy
- Zyxel IGMP Proxy