Hybrid7 P2P: What are the hardware requirements?

For Hybrid7 P2P, your router must meet the following requirements:

  • minimum 500 Mbit/sec WAN port
  • PPPOE and VLAN Tagging
  • Fibre port

If you have a router with a gigabit-capable WAN port but no fibre optic port, you can purchase a converter from us and connect it to your existing device.

The optics (SFP receiver) of the router must support the following wavelengths: 10 km/1310-1490 nm)

Please note that there are different fibre patch cables that are cut differently (depending on the router):

  • Simplex single-mode cable as patch cable LC/PC to LC/APC, compatible with conventional SFP optics.
  • Simplex single-mode cable as patch cable SC to LC/APC, compatible with FRITZ!Box 5490